NEW IN STOCK!
LEUCO TOPLINE CHOP AND CROSS-CUT SAW BLADES

Details Optimizing Chop Saw Blade

The new Optimizing Chop Saw Blade by LEUCO

Details Cross-Cut Saw Blade

The new Cross-Cut Saw Blade by LEUCO

NEW OPTIMIZING CHOP SAW BLADE PROGRAM

The LEUCO Optimizing Chop Saw Blade family was improved especially for clipping and cross cuts in solid woods, MDF, HDF, ledges on manual or automatic optimizing chop saws. Special attention was given to the tool body stability and the increase of edge lives, thus higher productivity and economic efficiency.

The chop saw blades in LEUCO topline quality are applied on undertable cross-cut saws, push-feed saws, through-feed saws, e.g. DIMTER Opticut „C", „S 90", „Quantum" and PAUL machines

       Cutting material: HL Board 06 for long edge lives

        WSA cutting geometry: extreme angle of 40° and shear angle of +5°
Available from stock with immediate effect.

o    Optimizing Chop Saw Blade Program: Machine / Application, Advantages, Stock Program - Fownload Folder

CROSS-CUT SAW BLADE PROGRAM

The design (tooth geometry and tool body design) guarantees universal application in soft and hard, dry and naturally humid solid woods as well as excellent cutting quality and tool life.

The saw blades in LEUCO topline quality are applied for chop cuts (one-sided, double-sided) on joinery machines and double clipping saws and on special machines e.g. by Kalfass, Springer, Krüsli, Hundegger, Weinmann. Thanks to the good chip evacuation, less postprocessing is necessary.

·         cutting material: HL Board 10

·         WSA cutting geometry: ATB 20° and shear angle of +5° for excellent cutting quality

Available from stock with immediate effect