|ZG-90 is the fast and effective way to touch up galvanised structures. ZG-90 cold zinc galvanise is a zinc-rich paint that provides a combination of rapid drying time, superior coverage, opacity, and protection against corrosion. It is an accurate colour match for newly galvanised steel and is ideal for protecting welding joints and cut ends.|
|1||5 x 100mm||3/16" x 4"|
|2||6 x 100mm||1/4" x 4"|
|3||6 x 150mm||1/4" x 6"|
|4||6 x 200mm||1/4" x 8"|
|5||6 x 250mm||1/4" x 10"|
|6||8 x 150mm||5/16" x 6"|
|7||8 x 200mm||5/16" x 8"|
Hardened Chrome Vanadium steel.
Non-slip Bi-material handle.
|MP-90 is a waxy, translucent green, anti-corrosion coating for the long-term (covered) protection of steel. Protects metal components exposed to high humidity conditions. For use indoors and outdoors to displace condensation and moisture, preventing the occurrence of corrosion, rusting and oxidation. Apply the coating to steel components for protection while in storage and international transportation. Ideal for injection moulds and extrusion dies.|
|MZ-90 is an enhanced maximum zinc formulation that delivers a light grey matt finish with excellent protection against rust. The optimum blend of high purity zinc (>99%) with a specialist resin package provides outstanding anti-corrosion performance with strong adhesion to metal substrates. Provides cathodic anti-corrosion protection that meets ISO 1461:1999 standards. Can be welded through and used as a primer or topcoat. Touch-dry in 40 minutes. Forms a hard, flexible film that actively resists flaking, cracking, peeling, and damage.|
|RX-90 Red Oxide Anti-Rust Primer is a fast drying protective coating for use on all metal surfaces. The modified alkyd resin binder and anti-corrosion pigments present protect against rust and provide an additional anti-corrosion layer for subsequent topcoats. RX-90 exhibits strong adhesion on degreased, bare metal surfaces and is paintable with all one-component paints after 1 hour. RX-90 can be welded through.|
|Machine / Application||› clipping and miter saws table saws
› clipping and miter cuts in PVC profiles
› for burr-free and smooth cuts in aluminum window and façade profiles
|Design||› negative hook angle
› tooth configuration: "G7"
› cutting material: HW HL Board 06
|Advantages||› reduced cutting pressure thanks to group tooth geometry
› excellent burr-free cuts with low roughness thanks to tooth partition
› extremely noise-reduced thanks to special laser ornaments
› increased edge life compared to chop saw blades with tooth configuration "TR-F"
› increased performance and economic efficiency