LEUCO Panel Sizing Saw Blades – UniCut "TR-F" 400MM
Panel Sizing Saw Blades
OMR 62.000
Loading..
Machine / Application › panel sizing saws › double-end tenoners › for sizing cuts in raw and veneered particleboard, hardboard, MDF panels and high-density plywood in single sheets and stacks |
Design › tooth configuration : alternate top bevel "WS" › cutting material : HW HL Board 06 |
Advantages |
DIA | B | b | d |
350 MM | 4,4 | 3.0 | 30 |
400 MM | 4,6 | 3.2 | 75 |
450 MM | 4,6 | 3.2 | 80 |
500 MM | 4,6 | 3.2 | 80 |
Machine / Application › panel sizing saws › for sizing cuts in plastic-laminated panels |
Design › from ØD=380, 15 degree hook angle › tooth configuration : triple chip / flat "TR-F" › cutting material : HW HL Board 03 and HW HL Board 04 plus › up to ØD=360, 10 degree hook angle › tooth configuration : triple chip / flat "TR-F" › cutting material : HW HL Board 03 and HW HL Board 04 plus |
Advantages › improved cutting quality thanks to optimized cutting geometry › noise-reduction thanks to laser ornaments |
Machine / Application › panel sizing saws › for sizing cuts in plastic-laminated panels |
Design › from ØD=380, 15 degree hook angle › tooth configuration : triple chip / flat "TR-F" › cutting material : HW HL Board 03 and HW HL Board 04 plus › up to ØD=360, 10 degree hook angle › tooth configuration : triple chip / flat "TR-F" › cutting material : HW HL Board 03 and HW HL Board 04 plus |
Advantages › improved cutting quality thanks to optimized cutting geometry › noise-reduction thanks to laser ornaments |
Machine / Application › panel sizing saws › for sizing cuts in plastic-laminated panels |
Design up to ØD=360, 10 degree hook angle › tooth configuration : triple chip / flat "TR-F" › cutting material : HW HL Board 03 and HW HL Board 04 plus › up to ØD=360, 10 degree hook angle › tooth configuration : triple chip / flat "TR-F" › cutting material : HW HL Board 03 and HW HL Board 04 plus |
Advantages › improved cutting quality thanks to optimized cutting geometry › noise-reduction thanks to laser ornaments |
Machine / Application › panel sizing saws › for sizing cuts in plastic-laminated panels |
Design › up to ØD=360, 10 degree hook angle › tooth configuration : triple chip / flat "TR-F" › cutting material : HW HL Board 03 and HW HL Board 04 plus |
Advantages › improved cutting quality thanks to optimized cutting geometry › noise-reduction thanks to laser ornaments |
Machine / Application › panel sizing saws › for finish cuts in veneered, foiled or melamine-laminated panels, in single sheets or in stacks up to 80 mm cutting height |
Design › vibration and noise damping ornaments › additional expansion slots › up to ØD=370, 10 degree hook angle › from ØD=380, 15 degree hook angle › tooth confi guration: G6 › cutting material: HW HL Board 04 plus |
Advantages › for highest performance demands › impressive cutting quality thanks to exact and precise cuts › reduced cutting pressure and optimized cutting geometry G6 › extremely low-noise and smooth running thanks to reinforced body and vibration and noise damping ornaments › clearly increased edge life thanks to improved HW grade |
Speical Same of size available on speical request. |