Shop

Paint

Price Range

OMR - OMR

TEETH(Z)

BORE

DIAMETER Ø

Reset
LEUCO Steel dry cutting steel saw blades f-wfa 355 mm 90 Z
LEUCO Steel dry cutting steel saw blades f-wfa 355 mm 90 Z
Dry Cutting Steel Saw Blades
D B b d Z
355 2.2 1.8 25.4 90
Machine / Application
› on dry-cutting chop saws and universal metal cutting machines
› for cutting compound materials, sheet metal, non-ferrous metals, PVC, cable conduits, profiles, SML-pipes, etc.
› recommended Speed (RPM):
Ø254 = 1750min-1
Ø305 = 1500min-1
Ø355 = 1250min-1
Design 
› with excellent cutting quality and extremely long tool life.
› cutting action easy, safe and clean.
› with extra wear-resistant carbide metal for long life.
Notes
› cutting width consistently 2mm wider than the main saw kerf
OMR 85.000 
Steel Dry Cutting Steel Saw Blades "F-WFA" 305MM   80 Z
Steel Dry Cutting Steel Saw Blades "F-WFA" 305MM 80 Z
Dry Cutting Steel Saw Blades
D B b d Z
305 2.2 1.8 25.4 80
Machine / Application
› on dry-cutting chop saws and universal metal cutting machines
› for cutting compound materials, sheet metal, non-ferrous metals, PVC, cable conduits, profiles, SML-pipes, etc.
› recommended Speed (RPM):
Ø254 = 1750min-1
Ø305 = 1500min-1
Ø355 = 1250min-1
Design 
› with excellent cutting quality and extremely long tool life.
› cutting action easy, safe and clean.
› with extra wear-resistant carbide metal for long life.
Notes
› cutting width consistently 2mm wider than the main saw kerf

 

OMR 55.000 
LEUCO Scoring Saw Blades "KO-WS" 200MM DIA
Scoring Saw Blades
D B b d Z HOOK
200MM 4.8-5.6 3.5 45 36 8 DEG
200MM 4.45-5.25 3.5 65 36 8 DEG
Machine / Application
› panel sizing saws scoring device › for scoring of plastic-laminated panels
Design
› tooth configuration : conical alternatetop bevel "KO-WS"
› cutting material : HL Board 04 plus and HW HL Board 06
Notes
› height adjustable to kerf of main saw blade
› 1mm scoring depth = .17mm wider than main saw kerf
› optimum scoring depth 1.5-2.5mm
OMR 36.000 
LEUCO Scoring Saw Blades "KO-WS" 180MM
Scoring Saw Blades
D B b d Z HOOK
180MM 4.45-5.25 3.2 30 30 8 DEG
180MM 4.45-5.25 3.2 45 36 8 DEG
Machine / Application
› panel sizing saws scoring device › for scoring of plastic-laminated panels
Design
› tooth configuration : conical alternatetop bevel "KO-WS"
› cutting material : HL Board 04 plus and HW HL Board 06
Notes
› height adjustable to kerf of main saw blade
› 1mm scoring depth = .17mm wider than main saw kerf
› optimum scoring depth 1.5-2.5mm
OMR 36.000 
Scoring Saw Blades "KO-WS" 120MM 20Z
Scoring Saw Blades
D B b d Z HOOK
120MM 3.1-3.9 2.2 20 24 8 DEG
120MM 3.1-3.9 2.2 22 24 8 DEG
Machine / Application
› panel sizing saws scoring device › for scoring of plastic-laminated panels
Design
› tooth configuration : conical alternatetop bevel "KO-WS"
› cutting material : HL Board 04 plus and HW HL Board 06
Notes
› height adjustable to kerf of main saw blade
› 1mm scoring depth = .17mm wider than main saw kerf
› optimum scoring depth 1.5-2.5mm
OMR 20.000 
LEUCO Scoring Saw Blades "WS" 250MM DIA
Scoring Saw Blades
DIA B b d Z Hook Corner
250MM 4.55 3.5 30 48 10 Deg 15 Deg
Machine / Application 
› panel sizing saws with controllable scoring device
› for scoring of plastic-laminated post forming panels
Design
› tooth configuration : alternate top bevel with "WS"
› cutting material : HW HL Board 06
Notes
› cutting width consistently 2mm wider than the main saw kerf

 

OMR 62.000 
LEUCO Panel Sizing Saw Blades – UniCut "WS"
Panel Sizing Saw Blades
Machine / Application
› panel sizing saws
› double-end tenoners
› for sizing cuts in raw and veneered particleboard, hardboard, MDF
panels and high-density plywood in single sheets and stacks
Design
› tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Board 06

Advantages
› maximum cutting quality and edge lives
› large depth of cut possible
› chip-free cuts even on the exit side
› perfectly suitable for laser-edge-technology

 

DIA B b d
350 MM 4,4 3.0 30
400 MM 4,6 3.2 75
450 MM 4,6 3.2 80
500 MM 4,6 3.2 80

 

OMR 55.000 
LEUCO Panel Sizing Saw Blades – UniCut "TR-F" 400MM
Panel Sizing Saw Blades
Machine / Application
› panel sizing saws
› for sizing cuts in plastic-laminated panels
Design
› from ØD=380, 15 degree hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 03 and HW HL Board 04 plus
› up to ØD=360, 10 degree hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 03 and HW HL Board 04 plus
Advantages
› improved cutting quality thanks to optimized cutting geometry
› noise-reduction thanks to laser ornaments
OMR 62.000 
LEUCO Panel Sizing Saw Blades – UniCut "TR-F" 380MM DIA
Panel Sizing Saw Blades
Machine / Application
› panel sizing saws
› for sizing cuts in plastic-laminated panels
Design
› from ØD=380, 15 degree hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 03 and HW HL Board 04 plus
› up to ØD=360, 10 degree hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 03 and HW HL Board 04 plus
Advantages
› improved cutting quality thanks to optimized cutting geometry
› noise-reduction thanks to laser ornaments
OMR 55.000 
LEUCO Panel Sizing Saw Blades – UniCut 350MM 72 Z TEETH
Panel Sizing Saw Blades
Machine / Application
› panel sizing saws
› for sizing cuts in plastic-laminated panels
Design
up to ØD=360, 10 degree hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 03 and HW HL Board 04 plus
› up to ØD=360, 10 degree hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 03 and HW HL Board 04 plus
Advantages
› improved cutting quality thanks to optimized cutting geometry
› noise-reduction thanks to laser ornaments
OMR 50.000 
LEUCO Sizing Saw Blades UniCut 300MM DIA 72 Z TEETH
Panel Sizing Saw Blades
Machine / Application
› panel sizing saws
› for sizing cuts in plastic-laminated panels
Design
› up to ØD=360, 10 degree hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 03 and HW HL Board 04 plus
Advantages
› improved cutting quality thanks to optimized cutting geometry
› noise-reduction thanks to laser ornaments

 

OMR 50.000 
Panel Sizing Saw Blades - Q-Cut "G6" 350MM DIA 75MM BORE 75 Te
Panel Sizing Saw Blades
Machine / Application
› panel sizing saws
› for finish cuts in veneered, foiled or melamine-laminated panels, in single sheets or in stacks up to 80 mm cutting height
Design
› vibration and noise damping ornaments
› additional expansion slots
› up to ØD=370, 10 degree hook angle
› from ØD=380, 15 degree hook angle
› tooth confi guration: G6
› cutting material: HW HL Board 04 plus
Advantages
› for highest performance demands
› impressive cutting quality thanks to exact and precise cuts
› reduced cutting pressure and optimized cutting geometry G6
› extremely low-noise and smooth running thanks to reinforced body and vibration and noise damping ornaments
› clearly increased edge life thanks to improved HW grade
Speical 
Same of size available on speical request.

 

OMR 65.000 
Chop Saw Blades neutral hook angle "TR-F" 500MM DIA 114 TEETH
CHOP SAW BLADES REDUC RING
DIA B b d
500mm 4.0 3.40 32
Machine / Application › chop and miter saws
› table saws
› for clipping and mitre cuts in aluminum profiles
Design › neutral hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 08
Advantages › burr-free cuts in profiles with low roughness
› noise-reduction thanks to laser ornaments
OMR 95.000 
Chop Saw Blades Neutral Hook Angle "TR-F" 420MM DIA ALUMINUM
CHOP SAW BLADES REDUC RING
DIA B b d
420mm 3.80 3.20 30
Machine / Application › chop and miter saws
› table saws
› for clipping and mitre cuts in aluminum profiles
Design › neutral hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 08
Advantages › burr-free cuts in profiles with low roughness
› noise-reduction thanks to laser ornaments
OMR 75.000 
Chop Saw Blades Neutral Hook Angle "TR-F" 400MM DIA ALUMINUM
CHOP SAW BLADES REDUC RING
DIA B b d
400mm 3.80 3.20 30
Machine / Application › chop and miter saws
› table saws
› for clipping and mitre cuts in aluminum profiles
Design › neutral hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 08
Advantages › burr-free cuts in profiles with low roughness
› noise-reduction thanks to laser ornaments
OMR 67.000 
Chop Saw Blades - positive hook angle "TR-F" 350MM DIA
Chop Saw Blades
DIA B b d
350MM 3.20 2.5 30
Machine / Application › table saws
› for dividing and miter cuts in aluminum and plastic profiles as well as for
wood-based panels (Corian, Noblan, Varicor and HPL)
Design › positive hook angle
› tooth configuration: triple chip / flat "TR-F"
› cutting material: HW HL Board 10
Advantages › noise-reduction thanks to laserornaments
OMR 60.000 
Chop Saw Blades - positive hook "TR-F" 300MM DIA
Chop Saw Blades
DIA B b d
300MM 3.20 2.5 30
Machine / Application › table saws
› for dividing and miter cuts in aluminum and plastic profiles as well as for
wood-based panels (Corian, Noblan, Varicor and HPL)
Design › positive hook angle
› tooth configuration: triple chip / flat "TR-F"
› cutting material: HW HL Board 10
Advantages › noise-reduction thanks to laserornaments
OMR 35.000 
LEUCO Chop Saw Blades "WS"
Circular and Chop Saw Blades
DIA B b d
550MM 4.80 3.20 30
Machine / Application › chop and cross-cutting saws
› for cross cuts in solid woods
Design › negative hook angle
› tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Solid 15
OMR 130.000 
LEUCO Chop Saw Blades "WS" 450MM DIA
Circular and Chop Saw Blades
DIA B b d
450MM 4.40 3.20 30
Machine / Application › chop and cross-cutting saws
› for cross cuts in solid woods
Design › negative hook angle
› tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Solid 15
OMR 85.000 
LEUCO Circular Saw Blades - negative "TR-F" 350MM DIA
Circular and Chop Saw Blades
DIA B b d
350MM 3.20 2.50 30
Machine / Application › chop and miter saws
› for clipping and mitre cuts in aluminum and plastic profiles
Design › negative hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 10
Advantages › noise-reduction thanks to laser ornaments
OMR 48.000 
LEUCO Circular Saw Blades - negative "TR-F" 250MM DIA
Circular and Chop Saw Blades
DIA B b d
250MM 3.20 2.50 30
Machine / Application › chop and miter saws
› for clipping and mitre cuts in aluminum and plastic profiles
Design › negative hook angle
› tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 10
Advantages › noise-reduction thanks to laser ornaments
OMR 35.000 
LEUCO Chop Saw Blades- profiles "G7" 400MM DIA
NF-Circular Saw Blades
DIA B b d
400MM 3.80 3.20 30
Machine / Application › clipping and miter saws table saws
› clipping and miter cuts in PVC profiles
› for burr-free and smooth cuts in aluminum window and façade profiles
Design › negative hook angle
› tooth configuration: "G7"
› cutting material: HW HL Board 06
Advantages › reduced cutting pressure thanks to group tooth geometry
› excellent burr-free cuts with low roughness thanks to tooth partition
› extremely noise-reduced thanks to special laser ornaments
› increased edge life compared to chop saw blades with tooth configuration "TR-F"
› increased performance and economic efficiency
OMR 65.000 
LEUCO TABLE SAW BLADE G5 400 DIA
Table Saw Blades
DIA B b d
400MM 3.0 2.20 30
Machine / Application CNC machining centers and aggregates.
› for chip-free sizing cuts as well as clipping and mitre cuts in wood based panels, solid wood and plastic.
Design › tooth configuration : G5 cutting material : HW HL Board 04 plus
Advantages excellent cutting quality for cross cuts excellent cutting quality thanks to special tooth geometry
extremely long edge lives , noise-reduction thanks to laser ornaments
OMR 85.000 
LEUCO TABLE SAW BLADES G5 350MM / 355MM DIA
Table Saw Blades
DIA B b d
355MM 3.00 2.20 30
355MM 3.20 2.20 25.40
Machine / Application CNC machining centers and aggregates.
› for chip-free sizing cuts as well as clipping and mitre cuts in wood based panels, solid wood and plastic.
Design › tooth configuration : G5 cutting material : HW HL Board 04 plus
Advantages excellent cutting quality for cross cuts excellent cutting quality thanks to special tooth geometry
extremely long edge lives , noise-reduction thanks to laser ornaments
OMR 80.000 
LEUCO TABLE SAW BLADE G5 300MM DIA / 303 DIA
Table Saw Blades
DIA B b d
300MM 3.0 2.20 30
305MM 3.0 2.20 25.4
Machine / Application CNC machining centers and aggregates.
› for chip-free sizing cuts as well as clipping and mitre cuts in
wood based panels, solid wood and plastic.
Design › tooth configuration : G5 cutting material : HW HL Board 04 plus
Advantages excellent cutting quality for cross cuts excellent cutting quality thanks
to special tooth geometryextremely long edge lives , noise-reduction
thanks to laser ornaments
OMR 100.000 
LEUCO TABLE SAW BLADES G5 250MM DIA / 255MM DIA
Table Saw Blades
DIA B b d
250MM 3.20 2.20 30
255MM 3.20 2.20 35
Machine / Application CNC machining centers and aggregates.
› for chip-free sizing cuts as well as clipping and mitre cuts in wood based panels, solid wood and plastic.
Design › tooth configuration : G5 cutting material : HW HL Board 04 plus
Advantages excellent cutting quality for cross cuts excellent cutting quality thanks to special tooth geometry
extremely long edge lives , noise-reduction thanks to laser ornaments
OMR 60.000 
LEUCO TABLE SAW BLADE G5 TYPE 200MM DIA
Table Saw Blades
DIA B b d
200MM 3.20 2.20 30
Machine / Application CNC machining centers and aggregates.
› for chip-free sizing cuts as well as clipping and mitre cuts in wood based panels, solid wood and plastic.
Design › tooth configuration : G5 cutting material : HW HL Board 04 plus
Advantages excellent cutting quality for cross cuts excellent cutting quality thanks to special tooth geometry
extremely long edge lives , noise-reduction thanks to laser ornaments
OMR 55.000 
LEUCO SAW BLADES "TR-F" 300MM DIA
Table Saw Blades
DIA B b d
300MM 3.20 2.20 30
Machine / Application › table saws
› vertical panel sizing saws
› for sizing cuts in plastic-laminated panels
Design › tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 06
Advantages improved bottom edge (without scoring saw blade) thanks to 5 degree hook angle
› noise-reduction thanks to laser ornaments
OMR 26.000 
LEUCO TABLE SAW BLADES "TR-F" 250MM DIA PLASTIC LAMINATED PANEL
Table Saw Blades
DIA B b d
250MM 3.20 2.20 30
Machine / Application › table saws
› vertical panel sizing saws
› for sizing cuts in plastic-laminated panels
Design › tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 06
Advantages improved bottom edge (without scoring saw blade) thanks to 5 degree hook angle
› noise-reduction thanks to laser ornaments
OMR 30.000 
LEUCO TABLE SAW "T RF" 350MM DIA MDF laminated
Table Saw Blades
DIA B b d
350MM 3.50 2.50 30
Machine / Application › table saws
› vertical panel sizing saws
› for sizing cuts in plastic-laminated panels
Design › tooth configuration : triple chip / flat "TR-F"
› cutting material : HL Board 04 plus
Advantages › extremely low-noise and smooth running thanks to vibration and noise
damping ornaments as well as special expansion slot combinations
› for each application case the correct tooth form
OMR 55.000 
Table Saw Blades "TR-F" 350MM DIA
Table Saw Blades
DIA B b d
350MM 3.50 2.50 30
Machine / Application › table saws
› vertical panel sizing saws
› for swing cuts in plastic-laminated panels
Design › tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 06
Advantages › noise-reduction thanks to laser ornaments
OMR 41.000 
LEUCO Table Saw Blades "TR-F" 250MM DIA
Table Saw Blades
DIA B b d
250MM 3.20 2.20 30
Machine / Application › table saws
› vertical panel sizing saws
› for swing cuts in plastic-laminated panels
Design › tooth configuration : triple chip / flat "TR-F"
› cutting material : HW HL Board 06
Advantages › noise-reduction thanks to laser ornaments
OMR 25.000 
LEUCO SAW BLADES THIN "WS" 300MM DIA
Table Saw Blades
DIA B b d
300MM 2.40 1.80 30
Machine / Application › table saws
› special saws
› cut-off saws
› for sizing and clipping cuts in solid woods
Design › tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Board 06
OMR 30.000 
LEUCO TABLE SAW BLADE THIN "WS" 300MM IDA
Table Saw Blades
DIA B b d
300MM 2.40 1.80 30
Machine / Application › chop and miter saws
› table saws
› for sizing and cross cuts in solid woods, wood-based panels and
plastic profiles as well as for cross cutting or profiles
Design tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Board 03
Advantages › long edge lives
OMR 62.000 
LEUCO SAW BLADES THIN DESIGN "WS" 180MM DIA VENEER CUT
Table Saw Blades
DIA B b / b1 d
180MM  1.60 2.2 / 1.0 16/30
Machine / Application › table saws
› machines Scheer FM
› for sizing cuts in thin-walled plastic profiles and veneers
Design › extra thin rim design of the steel plate
› tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Board 06
Advantages improved stability thanks to relieved tool body

 

OMR 60.000 
LEUCO TALE SAW BLADE "WS" 250MM DIA
Table Saw Blades
DIA B b d HOOK ANGLE
250MM 3.20 2.20 35 -2 Deg
Machine / Application › chop and miter saws
› table saws
› for swing and trimming cuts in wood-based panels
Design › tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Board 06
Advantages ear-free cutting without using scoring aggregate thanks to 38 degree ATB
› noise-reduction thanks to laser
› ornaments
Notes for profiles, ledges and plastic profiles

 

OMR 55.000 
LEUCO TABLE SAW BLADE "WS" 400MM DIA
Table Saw Blades
DIA B b d
400MM 3.50 2.50 30
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design › tooth configuration : alternate top bevel "WS"
› cutting material : HL Board 04
Advantages › optimal quality of cut, feed rate and adjustment for material
thickness thanks to various numbers of teeth

 

OMR 56.000 
LEUCO TABLE SAW BLADE "WS" 350MM DIA
Table Saw Blades
DIA B b d
350mm 3.50 2.50 30
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design › tooth configuration : alternate top bevel "WS"
› cutting material : HL Board 04
Advantages › optimal quality of cut, feed rate and adjustment for material
thickness thanks to various numbers of teeth

 

OMR 49.000 
LEUCO TABLE SAW BLADE "WS" 300MM DIA
Table Saw Blades
DIA B b d
300mm 3.20 2.2 30
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design › tooth configuration : alternate top bevel "WS"
› cutting material : HL Board 04
Advantages › optimal quality of cut, feed rate and adjustment for material
thickness thanks to various numbers of teeth

 

OMR 36.000 
LEUCO Table Saw Blades "WS" 250MM DIA
Table Saw Blades
DIA B b d
250mm 3.20 2.2 30
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design › tooth configuration : alternate top bevel "WS"
› cutting material : HL Board 04
Advantages › optimal quality of cut, feed rate and adjustment for material
thickness thanks to various numbers of teeth

 

OMR 33.000 
LEUCO TABLE SAW BLADE "WS" 350MM
Table Saw Blades
DIA B b d
350mm 3.50 2.50 30
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design › tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Board 06
Advantages optimal quality of cut, feed rate and adjustment for material thickness
thanks to various numbers of teeth
› extremely low-noise and smooth running thanks to vibration and noise
damping ornaments as well as special expansion slot combinations

 

OMR 37.000 
LEUCO TABLE SAW BLADES "WS" 300 MM DIA
Table Saw Blades
DIA B b d
300mm 3.20 2.2 30
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design › tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Board 06
Advantages optimal quality of cut, feed rate and adjustment for material thickness
thanks to various numbers of teeth
› extremely low-noise and smooth running thanks to vibration and noise
damping ornaments as well as special expansion slot combinations
OMR 30.000 
LEUCO TABLE SAW BLADES "WS" 250MM DIA
Table Saw Blades
DIA B b d
250mm 3.20 2.2 30
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design › tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Board 06
Advantages optimal quality of cut, feed rate and adjustment for material thickness
thanks to various numbers of teeth
› extremely low-noise and smooth running thanks to vibration and noise
damping ornaments as well as special expansion slot combinations

 

OMR 27.000 
LEUCO TABLE SAW BLADES "TR-F" 300MM DIA
Table Saw Blades
DIA B b d
300MM 3.20 2.20 30
Machine / Application › table saws
› for sizing cuts
Design New ornaments: vibration and noise dampening, expansion slots
› Cutting material: HL Board 03 and HL , Board 06
› tooth configuration : triple chip / flat "TR-F"
Advantages TOPLINE version for best cutting quality.
› universal use for a broad range of materials low noise level

 

OMR 27.000 
LEUCO TABLE SAW "WS" 450MM DIA
Table Saw Blades
DIA B b d
450MM 3.80 2.80 30
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design tooth configuration: alternate top bevel "WS"
› cutting material: HW HL Board 03 and HW HL Board 06
› hook angle 10°
Advantages optimum cutting quality, feed rate and adjustment for material thickness
thanks to various numbers of teeth noise-reduction thanks to laser ornaments from Ø 250 mm upwards

 

OMR 45.000 
LEUCO TABLE SAW "WS" 400MM DIA
Table Saw Blades
DIA B b d
400MM 3.50 2.50 30/35
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design tooth configuration: alternate top bevel "WS"
› cutting material: HW HL Board 03 and HW HL Board 06
› hook angle 10°
Advantages optimum cutting quality, feed rate and adjustment for material thickness
thanks to various numbers of teeth noise-reduction thanks to laser ornaments from Ø 250 mm upwards

 

OMR 28.000 
LEUCO TABLE SAW "WS" 350MM DIA
Table Saw Blades
DIA B b d
350MM 3.50 2.50 30/35
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design tooth configuration: alternate top bevel "WS"
› cutting material: HW HL Board 03 and HW HL Board 06
› hook angle 10°
Advantages optimum cutting quality, feed rate and adjustment for material thickness
thanks to various numbers of teeth noise-reduction thanks to laser ornaments from Ø 250 mm upwards

 

OMR 40.000 
LEUCO TABLE SAW "WS" 300MM DIA
Table Saw Blades
DIA B b d
300MM 3.20 2.20 30/35
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design tooth configuration: alternate top bevel "WS"
› cutting material: HW HL Board 03 and HW HL Board 06
› hook angle 10°
Advantages optimum cutting quality, feed rate and adjustment for material thickness
thanks to various numbers of teeth noise-reduction thanks to laser ornaments from Ø 250 mm upwards

 

OMR 27.000 
LEUCO TABLE SAW "WS" 250MM DIA
Table Saw Blades
DIA B b d Z
250MM 3.20 2.20 30 40
Machine / Application › table saws
› special saws
› for sizing cuts in wood-based panels
Design tooth configuration: alternate top bevel "WS"
› cutting material: HW HL Board 03 and HW HL Board 06
› hook angle 10°
Advantages optimum cutting quality, feed rate and adjustment for material thickness
thanks to various numbers of teeth noise-reduction thanks to laser ornaments from Ø 250 mm upwards

 

OMR 21.000 
TRIMMING SAW BLADE WITH CHIP LIMITERS 500MM DIA X 44 Z
TRIMMING SAW BLADE WITH CHIP LIMITERS 500MM DIA X 44 Z
RIP & TRIM SAW BLADES
DIA B b d Z NL
500MM 3.8 2.8 30 44 2/7/42+2/29,5/46,5+2/10/6
Machine / Application table saws
› special saws
› for sizing cuts in solid woods
Design tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Board 10
Advantages no chipped edges from knots thanks to chip limiter

 

OMR 45.000 
TRIMMING SAW BLADE WITH CHIP LIMITERS "WS" 400MM DIA
TRIMMING SAW BLADE WITH CHIP LIMITERS "WS" 400MM DIA
RIP & TRIM SAW BLADES
DIA B b d Z NL
400MM 3.5 2.5 30 36 2/7/42+2/29,5/46,5+2/10/6
Machine / Application table saws
› special saws
› for sizing cuts in solid woods
Design tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Board 10
Advantages no chipped edges from knots thanks to chip limiter

 

OMR 32.000 
LEUCO TRIMMING SAW BLADES WITH CHIP LIMITER "WS"
LEUCO TRIMMING SAW BLADES WITH CHIP LIMITER "WS"
RIP & TRIM SAW BLADES
DIA B b d Z NL
250MM 3.2 2.2 30 24 2/7/42+2/29,5/46,5+2/10/6
Machine / Application table saws
› special saws
› for sizing cuts in solid woods
Design tooth configuration : alternate top bevel "WS"
› cutting material : HW HL Board 10
Advantages no chipped edges from knots thanks to chip limiter

 

OMR 17.000 
GANG RIP SAW BLADES WITH COOLING SLOTS "F" 300MM DIA
GANG RIP SAW BLADES WITH COOLING SLOTS "F" 300MM DIA
RIP & TRIM SAW BLADES
DIA B b d dmax Flange Z SLOT DKN NL
300MM 3.4 2.2 80 100 140 28 4 18.5X5 6/5.5/91+4/6,6/95+2/13/100
Machine / Application › molders
› gang-rip saw with one or two shafts (e.g. Raimann, Paul, Costa)
› for precise ripping cuts in dry and planed hard woods
Design tooth configuration: flat "F" cutting material: HW HL Board 10
Advantages › special design and tungsten carbide grade for highest cutting quality and
very long edge lives

 

OMR 52.000 
LEUCO GANG RIP SAW BLADE WITH RACKER "F"  350MM DIA
LEUCO GANG RIP SAW BLADE WITH RACKER "F" 350MM DIA
Gang-Rip Saw Blades
DIA B b d dmax Flange Z RACKER DKN NL
350MM 3.5 2.5 70 - 120 20 2+2 20X5 -
Machine / Application molders
gang-rip saw with one or two shafts (e.g. Raimann, Paul, Costa)
for precise ripping cuts in dry and planed hard woods
Design tooth configuration: flat "F" cutting material: HW HL Board 10
Advantages special design and tungsten carbide grade for highest cutting quality and very long edge lives

 

OMR 50.000 
LEUCO GANG RIP SAW BLADE WITH RACKER "F" 300MM DIA
LEUCO GANG RIP SAW BLADE WITH RACKER "F" 300MM DIA
Gang-Rip Saw Blades
DIA B b d dmax Flange Z RACKER DKN NL
300MM 3.2 2.2 70 - 120 28 2+2 20 X 5 -
Machine / Application molders
gang-rip saw with one or two shafts (e.g. Raimann, Paul, Costa)
for precise ripping cuts in dry and planed hard woods
Design tooth configuration: flat "F" cutting material: HW HL Board 10
Advantages special design and tungsten carbide grade for highest cutting quality and very long edge lives
OMR 49.000 
LEUCO GANG RIP SAW BLADE WITH RACKER "F" 225MM DIA
Gang-Rip Saw Blades
DIA B b d dmax Flange Z RACKER DKN NL
225MM 2.0 1.4 40 - - 16 2 - -
Machine / Application molders
gang-rip saw with one or two shafts (e.g. Raimann, Paul, Costa)
for precise ripping cuts in dry and planed hard woods
Design tooth configuration: flat "F" cutting material: HW HL Board 10
Advantages special design and tungsten carbide grade for highest cutting quality and very long edge lives

 

OMR 37.500 
GANG RIP SAW BLADES WITH RACKERS "F" 200MM DIA
Gang-Rip Saw Blades
DIA B b d dmax Flange Z RACKER DKN NL
200MM 2.0 1.4 40 75 115 16 2 - -
Machine / Application molders
gang-rip saw with one or two shafts (e.g. Raimann, Paul, Costa)
for precise ripping cuts in dry and planed hard woods
Design tooth configuration: flat "F" cutting material: HW HL Board 10
Advantages special design and tungsten carbide grade for highest cutting quality and very long edge lives

 

OMR 37.000 
LEUCO GANG RIP SAW BLADE WITH RACKER "F" 180MM DIA
Gang-Rip Saw Blades
DIA B b d dmax Flange Z RACKER DKN NL
180MM 2.4 1.6 40 55 95 16 2 - -
Machine / Application molders
gang-rip saw with one or two shafts (e.g. Raimann, Paul, Costa)
for precise ripping cuts in dry and planed hard woods
Design tooth configuration: flat "F" cutting material: HW HL Board 10
Advantages special design and tungsten carbide grade for highest cutting quality and very long edge lives

 

OMR 33.000